PGilleland
New Member
Does anyone know if Flexi Pro 8.2 will work as a rip for the Mimaki JV33-130 or will I need to upgrade Flexi?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
flexi 8.2 will it work with Mimaki JV33-130
- Thread starter PGilleland
- Start date
SightLine
║▌║█║▌│║▌║▌█
95% sure it will. I know 100% 8.5/8.6 does. I think from 8.0 and up the JV33 is supported. Best bet to be 100% sure will be to get someone with 8.0/8.2 to open Production Manager and choose "Add Setup" and double check that it is on the list - they do not have to actually add it - they can just look at the list then cancel.
engineerfrmindia
New Member
Hi Dude
After install the software You need to install (paste) latest device drivers into Device driven folder then go to add set up
After install the software You need to install (paste) latest device drivers into Device driven folder then go to add set up
engineerfrmindia
New Member
Hi,
If you have jv33 drivers for flexi please give me
If you have jv33 drivers for flexi please give me
PGilleland
New Member
thank you