Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Follow On From Im In Trouble Please Help!

Discussion in 'Graphtec' started by james potts, May 8, 2006.

  1. james potts

    james potts New Member

    9
    0
    0
    May 5, 2006
    THE INPUT FROM EVERYONE WAS SPOT ON AND MUCH APPRECIATED. I HAVE TRIED EVERYTHING THAT I KNOW OF AND IM STILL STUCK. SIGNLAB IS STILL SAYING THAT THE DEVICE IS NOT RESPONDING. I KNOW THIS IS A LONG SHOT BUT I WAS WONDERING IF ANYBODY WOULD LEND ME A MANUAL FOR THE GRAPHTEC FC2100- 60A AS IT MIGHT SHED SOME LIGHT ON THE PROBLEMS IM HAVING, OR IF SOMEONE COULD PHOTO COPY ONE FOR ME AND I WILL PAY FOR ANY COSTS INCURRED. IM REALLY STUCK AND DONT KNOW WHERE ELSE TO TURN. IM WAITING FOR A LEAD TO ARRIVE WHICH MIGHT SOLVE THE PROBLEM, BUT THEN IT MIGHT NOT.

    CHEERS EVERYBODY, JAMES:help:
     
    Tags:
  2. SAS

    SAS Active Member

    611
    0
    16
    Aug 23, 2005
    NC
    Have you tried contacting Graphtec for a manual? I saw on your other post that you need a cable I would think they would be able to help you out with both.
     
  3. james potts

    james potts New Member

    9
    0
    0
    May 5, 2006
    ive rang a few times but i keep getting an answer machine. left a couple of messages but no one has contacted me. i will try again tomorrow.

    all the best, james
     
  4. NBaessler

    NBaessler New Member

    14
    0
    0
    May 23, 2006
    James,
    I tried to look for a manual for you but they have discontinued them. I will keep looking for you.

    Neal
    nbaessler@graphtecamerica.com
     
  5. Pro Signs & Graphix

    Pro Signs & Graphix Very Active Member

    2,477
    0
    0
    Apr 18, 2006
    Call Ron at Accugraphic 800-268-3672, because your machine sounds like it is in need of service.

    Other than reloading your software - there is not much else you can do. It sounds like the machine is "printing" an error - which most manufacturers will not usually release the info anyway.

    Anyway - Ron should be able to help and steer you correctly.

    Hope this helps.
     
  6. james potts

    james potts New Member

    9
    0
    0
    May 5, 2006
    cheers pro signs and graphix, it is sorted now. it ended up being the hp-gl. i managed to get through to graphtec and they gave me a step by step guide which was cool. thanks for your reply,
    all the best, james
     
Loading...

Share This Page

 


Loading...