Font Help Please

[NGraphics]

I have yet another font that eludes me =(

 

[Fred Weiss]

Chisel Solid. There used to be a "solid" version. You may find that you will need to use the engraved version and delete the centers.

 

[WI]

Looks like someone beat Elephant with a bag of hot nickles. Where is that from?

 

[NGraphics]

I just looked at the Chisel Solid fonts to download and it looked real thin and not like that =(

 

[NGraphics]

It was an old font my boss had used and its been welded and can't do what I want with it and I can't find it anywhere and he said we don't have that font anymore cause that was from an old graphics program

 

[Fred Weiss]

See my post #2. I have added additional info and a link.

 

[NGraphics]

Just asked the boss and he said it was an old gerber font but hasn't been able to find it outside and this font was used for a company and they'd like to keep using it since it's been used by them for years and now they want it in a different layout and have an arc with it and such.

 

[Fred Weiss]

See my post #2. I have added additional info and a link.

 

[NGraphics]

I didn't notice your link with the font, sorry about that. I found Nauert solid font download which is similar to the font but free and I just had to remove the centers like you had mentioned. Thank you for the help =)

 

[WI]

Per Weiss's tip, check this out;

http://www.identifont.com/similar?606

All of the glyphs have punch-outs, but the silhouette is the same as your sample.

 

[mark-s]

ChiselD remove inside lines should work.

mark-s