• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

font question

1

149motorsports

New Member
looking for the font for 00.thanks
 

Attachments

  • 10806984_597382490388584_943422776_n.jpg
    10806984_597382490388584_943422776_n.jpg
    45.2 KB · Views: 64
Last edited:
G

GB2

Old Member
What software do you design with? For that particular number it's a pretty easy matter to do it manually if you had to. Just outline the "0" so you have a smaller copy right in the middle of a larger copy, divide it diagonally on the two corners and assign the correct colors to the individual parts.
 
B

Bobby H

Arial Sucks.
I use a slightly different method than one described at the Letterhead fonts page to create prismatic effects in letters. It's a little more complicated, but works well on curved letters.

In CorelDRAW, I use the blend function to create the center line on the letter. First I break open the paths of a letter, such as "C" for example. I use a 1 step blend between the outer curve and inner curve on the "C". At first the blend will be messed up, but if you select one of the two control paths of the blend and click the Reverse Path Direction button it will create a uniform center line from one end of the "C" to the other. From there you use your subjective judgment on how to trim the center line and create the prismatic bevels.

Some blends have to be created in smaller chunks. The process can get time consuming if you're working with complicated letters. But the end result looks far more controlled and deliberate than the horrible looking prismatic bevels so many people crank out of Photoshop. Computers just don't know at all how to create a prismatic bevel effect properly with any sort of 1 click filter.
 
You must log in or register to reply here.
Top