• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Fuji Acuity F-67 reservoir low

caldk

New Member
Hello everyone,
Anybody else ever had this problem. No matter what we do we cannot FILL the reservoir. Therefore we can´t print anymore
Reservoir LOW.jpg


Any hints would be appreaciated greatly
 

caldk

New Member
Thanks for your reply:) sorry i did not write what we have tried. But the list would be to long. cards pumps
We have changed the reservoir with new sensors and the print controlling the print heads still the same
right now we are also replacing the LC completely with print and reservoir as it had a crack Our FUJI is 7 years now.
 

CMYKENGINEERING

New Member
Thanks for your reply:) sorry i did not write what we have tried. But the list would be to long. cards pumps
We have changed the reservoir with new sensors and the print controlling the print heads still the same
right now we are also replacing the LC completely with print and reservoir as it had a crack Our FUJI is 7 years now.
No problem. I'm sorry to hear about your difficulties. If you were in the United States, we could look into sending a tech to you.
 
Top