Gerber Edge FX Process not right

[Graphics on Demand]

I have read all the previous forums and still cant figure out why my FX is being screwy. I am trying to print an image in CMYK, which I have done hundreds of times before. I have the color correction off, and the Edge 300DPI CMYK profile chosen. The first time I printed the image, the original came out perfect (or as perfect as CMYK can be) but the second repeat on the same page came out inverted, all the colors were off and the light spots were dark black and the dark spots were neon green and yellow. Since then, anything I try to print CMYK comes out crazy colored. I only use it for small images that I add into the decal, so all the spot colors are right. I have even deleted Omega and re-installed it! I cannot find any help. Please, someone has to know why its doing this! I have attached a pic of the the only one that ever printed right, and the ones I get now.

 

[AF]

Just a hip-shot guess, but did you use the correct foils at the correct times?

 

[Graphics on Demand]

I did, thanks for the question. I have printed about a dozen of these stupid coke bottles, and every time they come out looking like this.

 

[Fred Weiss]

Try deleting the .PRM file as well as the saved ripped image and try again.

 

[Graphics on Demand]

I did that, even completely re-created the file from scratch, still printing wacky.

 

[idsignsil]

Did you recently update/upgrade Omega Composer? That may have done something. When I upgraded, I then had to update the firmware on the FX.