We did a sign for a client 5'x20' (2 '5x10' panels connected). He liked it when he picked it up but after hanging it he is wondering if we can go bigger to make it easier to read from a distance. What kind of materials are used to do this? Just more sheets of alumalite panels connected together?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Going bigger, but how?
- Thread starter mudmedia
- Start date
401Graphics
New Member
either that or whatever your supplier has on rolls
Gino
Premium Subscriber
How do you figure a 10' x 30' with only 3 5' x 10's ??
Scab a frame together on the building and then add your substrate to it. This past summer we did a 12.5' x 40' on the side of a building about 35' to the bottom.
Yeah I just did the panels and he mounted it to plywood himself. Says it is hard to read (and no the design was not busy it was black text on white panel) so he is thinking about going bigger. I would not mind making the frame instead of him this time if we decide to go bigger.
ha ha not as professional as I would imagine...Screwed it to plywood with a 2x4 on each end and sunk it in the ground