Graphtec 7000

[signed off]

My graphtec 7000 needs a new cutting strip ( the peel and stick black strip) very hard to find in Ontario.
My question is can I use a Roland cutting strip, is there a difference between them,
looking for input

 

[tbullo]

Graphtec has an online store you can buy that at. Around $50 if I remember right.

 

[149motorsports]

I bought mine from Graphtec. Check ebay also.

 

[Bill Modzel]

I bought a roll or 1/2" teflon tape years ago for less than the cost of a replacement strip. The hardest thing to do is cut it down to the 1/4" width. It is teflon after all. I can't remember the supplier but just Google it.

 

[bulldozer]

My graphtec 7000 needs a new cutting strip ( the peel and stick black strip) very hard to find in Ontario.
My question is can I use a Roland cutting strip, is there a difference between them,
looking for input

theoretically, it should work fine. the blade is the same, and they both need pressure to cut.