Graphtec CB09 blades

[Dennis422]

Hi there.
I'm looking for someone that have purchased off-brand blades for Graphtec cutter CB09. I was wandering if you could share your experience you had with less expensive (It sounds bad when you call them cheap ) blades, and of course, please share the source if you had a good experience and you liked the blades.

Thanks in advance.

 

[CP Signs]

Don't need to buy knock offs. SignWarehouse has the Graphtec blades for $11.

 

[tomence]

http://www.cleancutblade.com/

The best blades you can buy at a great price.

 

[thmooch]

http://www.cleancutblade.com/

+1

 

[jasonx]

+1 for Ross at Clean Cut

 

[Dennis422]

Thanks guys.

 

[cleancutblade]

Thanks for the votes guys.

CP sorry to burst your bubble, but the blades from sign warehouse are knockoffs not OEM.

 

[CS-SignSupply-TT]

3rd party Graphtec blades

Thanks guys.

Dennis, we distribute the Clean Cut Graphtec blades. Please let me know how we may help you.

 

[Dennis422]

Already got them from CC

 

[knucklehead]

Would CC blades be considered an 'off brand'? I know they are the best brand.

 

[Graphiki]

Blades

I have a question about the same blades.
Ordered CB09 blades put them in and they stop swiveling and don't work.
The new ones are a little different then the old ones. I have been trying to figure out if I should just buy a new holder.
Original ones that came with the machine work fine when I put them back in.

Here are the two

 

[Graphiki]

sorry it's so grainy

 

[IGD]

I have a question about the same blades.
Ordered CB09 blades put them in and they stop swiveling and don't work.
The new ones are a little different then the old ones. I have been trying to figure out if I should just buy a new holder.
Original ones that came with the machine work fine when I put them back in.

Here are the two
View attachment 82842

looks the same to me one has grooves and one doesnt, Im sure they just found a cheaper way to make them with less material to save money

 

[Graphiki]

That's what I thought.
I ordered them from 1 supplier (not oem) and sent them back when they didn't work. I then ordered oem blades.... Stil no luck.
Looking at just getting new holder.

 

[401Graphics]

I am currently using the $11 one from signwarehouse with no issues, and it cuts very clean, everything weeds very easy.

 

[CS-SignSupply-TT]

Don't forget the spring

 

[mfatty500]

I use an $8.00 blade (60*) from Specialty Graphics, I cut t-shirt vinyl 99.9% glitter, but I do use a lot of blades as it tears 'em up pretty quick. I used a bunch of clean cut blades also, therefore I use the cheap ones.

 

[cleancutblade]

can't fault you for that

Mr Fatty, do you have a red holder for your machine? I have a new blade made out of a new material for glitter and reflective and magnets, but I don't make it for the blue holder yet. I can't blame you abit for using a cheaper alternative for glitter it is nasty on blades. Blades on the market aren't made to be used against metal.

 

[HillBilly Graffix]

Im trying to find a blue blade holder fro a graphtec jx1060, anybody know where to get one ?

 

[CS-SignSupply-TT]

@HillBilly Graffix CS Sign Supply is happy to help you with your Graphtec bluetip bladeholder. We have OEM and 3rd party ready to ship. Please let me know how I may help.