Graphtec CE6000-60 cutting force?

[Proximus]

Hello,

what is Graphtec CE6000-60 cutting force?

i found different informations on official graphtec brochures...

they say here 300gr: http://www.graphtecamerica.com/docs/Datasheets/GAI_Book_Catalog_2013_CE6000_WEB.pdf

and here that it is 450gr: http://www.anilinkompaniet.se/img/Graphtec/Graphtec_CE6000_serien.pdf

 

[GAC05]

Edit- maybe I am wrong........
The owner's manual that you can download off the Graphtec site lists the 20 & 60 as having a max of 300 in 31 steps and the 120 a max of 450 in 38 steps.
The 60 has the lower cutting force the 120 (48") model has the 450.

wayne k
guam usa

 

[Proximus]

Edit- maybe I am wrong........
The owner's manual that you can download off the Graphtec site lists the 20 & 60 as having a max of 300 in 31 steps and the 120 a max of 450 in 38 steps.
The 60 has the lower cutting force the 120 (48") model has the 450.

wayne k
guam usa

yes but on other official sources:


http://www.graphteccorp.com/imaging/ce6000/ce6000_specs.html

http://www.graphteccorp.com/imaging/ce6000/ce6000_brochure.pdf


http://www.anilinkompaniet.se/img/Graphtec/Graphtec_CE6000_serien.pdf

 

[GAC05]

Yeah I see that,
that's why I edited my first post.
I thought I knew what I was talking about but as usual I find out I don't.....
Need an owner of the 60 to weigh in.


wayne k
guam usa

 

[Laz0924]

My manual says 31 or 310 I have the ce5000-60 which is basically the same cutter.
Shows 38 for the 120 model