Halfway through printing some vinyl decals my Roland (Sp-300) will sometimes pause.

[ATW]

While printing some vinyl my Roland will pause, clean the heads, then resume exactly where it left off.

It seems to only do this with some files, while others it can print for hours with out even pausing once.

I tried to power down the printer, shut it off, wait, then turn it back on in hopes it may work.

Any other suggestions is most welcome, Thanks!

 

[ATW]

IF anybody cares.
I fixed it.

I ran the printer on Uni Direction instead of Bi-Dir and it works fine.

Hope this may help anyone with this issue

 

[J Hill Designs]

probably data throughput issue from computer to printer, or perhaps you are RIPping while printing

unidirectional slows the printing down, thereby making it 'need' data slower