Need Help Have a Latex 570 - need material help

[inkDOTS]

We could use any tips on printing on
1. Non Adhesive Vinyl - we use Druatex Blockout
2. Photo-paper - we use Primeart 8mil Gloss

We cant figure out how to keep the material from winkling up once it hits the dryer, tried adjusting the heat but if we get too low to where it does not wrinkle it does not dry well at all.

anyone els had these problems?
Any suggestions on different materials
we love the quality and the time save that we get with the latex printers

 

[Christian @ 2CT Media]

You either need interpass delay or more passes

 

[Dan360]

Intellicoat PosterMax paper works great on our 360, we've been using it since we got the printer.

 

[BigfishDM]

Intellicoat PosterMax paper works great on our 360, we've been using it since we got the printer.

How much are you paying for the Postermax? My poster gloss paper prints really great in latex and I don't think anyone can compete with my prices on it, if you are interested. 36"x200' rolls are only $66 and I am local to you fyi.

 

[Dan360]

How much are you paying for the Postermax? My poster gloss paper prints really great in latex and I don't think anyone can compete with my prices on it, if you are interested. 36"x200' rolls are only $66 and I am local to you fyi.

That sounds a lot lower than what we're paying. We're at $306 CAD for 54". You have a location in Canada? You may be thinking of Ontario, California. Which is confusing cuz the abbreviation is the same.

 

[inkDOTS]

How much are you paying for the Postermax? My poster gloss paper prints really great in latex and I don't think anyone can compete with my prices on it, if you are interested. 36"x200' rolls are only $66 and I am local to you fyi.

contact info for yalls texas branch would be great

 

[BigfishDM]

That sounds a lot lower than what we're paying. We're at $306 CAD for 54". You have a location in Canada? You may be thinking of Ontario, California. Which is confusing cuz the abbreviation is the same.

Dam, I was hoping Ontario California. My bad.

 

[BigfishDM]

contact info for yalls texas branch would be great

12133 Valliant St.
San Antonio, TX 78216 (Google Maps)
Phone: 210- 886-8236
Toll Free: 800-421-6167
Fax: 210-886-8229
Bill Day, Branch Mgr. bday@gansink.com

 

[ikarasu]

That sounds a lot lower than what we're paying. We're at $306 CAD for 54". You have a location in Canada? You may be thinking of Ontario, California. Which is confusing cuz the abbreviation is the same.

Check out AGS And Ritemedia...

http://www.allgraphicsupplies.com/p...loss-solvent-paper-54-x-100-rm-paper-54-group

I use it a lot for latex, works great. Usually I stay away from budget brands for vinyl... But paper is paper, this stuff is less than $150 for a roll thats 54" x 100 ft, and prints great.