Have problem with CYAN on my VP-540

[enseigneslettragecom]

Hello, i have a problem with my printhead cyan, i have change my 2 cyan damper and always the same ! HELP ME !

 

[J Hill Designs]

make sure you are getting a good seal at the caps, perhaps replace the captops

 

[dgpartsmall]

out of alignment

Change the wiper, captop and clean the printhead,flushing the ink via the maintenance option.​

​

​

​

​

​

If the captop did not be replaced for long time, it will effect the printing quality, many customer found their captop is saturated with ink.​

​

​

 

[enseigneslettragecom]

Thanks

Thanks, I'm going to change the captop ...

 

[GTSTech_1]

You could try replacing the captop and dampers, but looking at the overspray on the print, I would say be prepared for a head replacement.

My .02

GTSTech_1