We are having an issue with our HP latex 370. It was printing fine the other day and then it stopped with the error code 42:10. The carriage wouldn't move smoothly by hand. Nothing was blocking it and I cleaned and oiled the rail, but nothing helped. We ordered a scan axis motor and changed it along with a new belt that we had. Now when we try and start the printer right away the light inside starts blinking like a strobe light and we get an error code 01.1:10. It says "class: electronics and sub class: printmech board". The only thing we touched was connecting the new motor to it. Any idea what would be causing this error?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
HELP! HP latex 370 is broke
- Thread starter MODA
- Start date
Johnny Best
Active Member
Where did you buy the parts?
balstestrat
Problem Solver
You probably touched another cable ever so slightly. Unless the old motor broke the printmech.