Help. Looking for z motor gerber dimension 200E

[teddc671]

Help...looking if anyone on here has an x axis motor type M063-LS-518E for a very old Gerber Dimension 200E cnc router for sale or can direct me to one. Thank you.

 

[nssignguy]

Help...looking if anyone on here has an x axis motor type M063-LS-518E for a very old Gerber Dimension 200E cnc router for sale or can direct me to one. Thank you.

I have an old Gerber 200 that I can sell parts on if you need. Let me know.

 

[teddc671]

I have an old Gerber 200 that I can sell parts on if you need. Let me know.

Thank you. Let me know how much for it.

 

[teddc671]

Thank you. Let me know how much for it.

Shoot a picture of it's label on top. Sounds like the same slo-syn steppers that came off my multicam, they are just stepper motors but you need more info to get the properly configured one.

Thanks.

 

[teddc671]

Here's a few pics

 

[teddc671]

 

[packratsigns]

Did you ever get a motor ?

 

[JBurton]

These are simple to replace, you just need those values on the label to match a new motor. Brand doesn't matter, exceeding the hold value of 150oz/in is fine, but voltage, amperage, and steps per revolution need to match. You'll also want to make sure your new one has a long enough shaft of the same diameter, but otherwise it should just be a nema 23 motor.

 

[teddc671]

Did you ever get a motor ?

No. Still looking. Any suggestions?

 

[teddc671]

These are simple to replace, you just need those values on the label to match a new motor. Brand doesn't matter, exceeding the hold value of 150oz/in is fine, but voltage, amperage, and steps per revolution need to match. You'll also want to make sure your new one has a long enough shaft of the same diameter, but otherwise it should just be a nema 23 motor.

Thank you..would you happen to recommend or lead me to the right place that has the for sell? I appreciate your help.

 

[Vassago]

Looks like a standard stepper. Just measure the mount to tell you what size, then find one with the same shaft details. Should be either 4,6 or 8 wires depending on the type, but they all connect to 4

 

[nssignguy]

I still have that motor you want wanted and we discussed but never heard from you again. Let me know.

 

[JBurton]

I'd buy the one nssignguy has on hand, the amount of time chasing down the appropriate wiring scheme alone would be well worth the difference in cost between whatever he's selling and the cheapest equivalent.

 

[teddc671]

I still have that motor you want wanted and we discussed but never heard from you again. Let me know.

Yes i still need it. Sorry I got a laser and got caught up with it. Now i need router up and running. Thanks. Will send you an email.