Help me understand these specs....

[Bob Loblaw]

I'm looking at the CE7000-60 and I'm trying to understand what these specs mean. Can someone help me understand these 3 specs so I can accurately compare machines:

Minimum character size	Approx. 5 mm (0.016") alphanumeric (depending on character font and type of media)
Programmable resolution	GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Repeat-ability	Max. 0.1 mm in plot up to 2 m (*1)

Can it not cut anything smaller than 5mm?
What is the difference between program resolution and repeat-ability?
Anyone translate this numbers into English?

Thanks in advance!!!

 

[victor bogdanov]

If you are comparing the Ce7000 to the GX24 these specs are the absolute last thing you should worry about, those specs are useless in a practical sense. The Graphtec is a much better machine

 

[ProSignTN]

5mm (.016"). To the best of my calculations 5mm equals .1969", (1"= 25.4mm). I understand why it is confusing.

 

[NazGraphics1]

Great machine for small run stickers