• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Help please Falcon outdoor 62" print head / nozzle check

B

bean0085

New Member
I just purchased new print heads, capping station, dampers, and print head cables for my Falcon outdoor 62" replaced everything except the cables. Did power clean as soon as i replaced it all. Attached are photos of what the nozzle check looks like. PLEASE HELP
 

Attachments

  • IMAG0038.jpg
    IMAG0038.jpg
    19.9 KB · Views: 80
  • IMAG0039.jpg
    IMAG0039.jpg
    20.8 KB · Views: 85
  • IMAG0040.jpg
    IMAG0040.jpg
    18.7 KB · Views: 88
R

randya

New Member
I would try a few small cleans, then start head soak.

A lot of deflected nozzles, hopefully you didnt damage the head during install.
 
Ghost Prophet

Ghost Prophet

New Member
That looks pretty good for a FO 62, but you are missing a nozzle. Try head soaks and pulling the ink through the capping station via the waste ink lines.
 
You must log in or register to reply here.
Top