Help please

[Brett]

Does any one use or have any dealings with this machine good or bad Secabo C30IV Vinyl cutter

 

[kanini]

I have a larger one, the 60 inch. Worked very well for the price, but very very noisy, stepper motors and overall build quality/accuracy is... okay. I nowdays use mostly my large Roland cutter but when in a hurry to get simpler cuttings out it works ok. For the price I'd say it's a good value for money if you're just starting out but if you have the opportunity to buy a good used brand SERVO motor cutter you won't regret it, the stepper motor noise "music" will be a pain after a while...

 

[Jackpine]

as in your other post....

as in your other post....

16' wide desktop

Graphics One LLC sells this in black. It's a 16' wide desktop and retails for $999.00. It has upto 26 inches cutting speed, 750g cutting force.
It's in the March 2013 Digital Output in the marketplace section.

[video=youtube;c9FQJbwea6k]http://www.youtube.com/watch?v=c9FQJbwea6k[/video]
​

Last edited by Jackpine; Today at 02:45 PM. Reason: youtube​

 

[Brett]

Thanks to all inc Mod.:signs101:
Noise will not be the problem, we are using it for low volume in house work, so speed is not the problem.
Ease of programming a pattern on both edges of a sheet no cutting in middle + reliability is the key to our requirements.
Max length 5ft max with 8ins, cut 2.5 ins in on either edge, as said not a speed not a problem ,cutting 3M tape 008 to 014th

 

[Jackpine]

Look here...

Look here.... cost less and is just as good...has contour cutting ability and Nick is a good vendor too.
http://www.hhsignsupply.com/productcart/pc/GCC-24-Expert-24-Vinyl-Cutter-470p42782.htm

 

[rera]

I have a larger one, the 60 inch.

I have bought a second hand Secabo C60IV and I still don't understand how the Lapos crap marks reader works. Can you help me?

 

[decalman]

It looks a little scary to me. Maybe a chinese clunker. 750 grams downforce, doesn't make sense.
Somebody offered me a chance to buy a plotter named " Mastercutter" No thanks to that.....Whats a mastercutter?

 

[ams]

I wouldn't trust it because everything online about it is in another language so chances are there is no good tech support.
Not only that, I only buy certain name brands, but that's just me.