Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help ! SP 300v

Discussion in 'Roland' started by Terryb62, Aug 30, 2010.

  1. Terryb62

    Terryb62 New Member

    3
    0
    0
    Aug 24, 2010
    HI All ! ....Newbie from Boston.

    Having some issues with my Roland VersaCamm sp 300v , changed a print head maifold and now the yellow and magenta head is not printing, is there a test to do to see if the head failed . or what to do next ....Any help would be greatly appreciated.


    Thanks
     
    Tags:
  2. CS-SignSupply

    CS-SignSupply Very Active Member

    Did you unplug the power before removing the printhead cables?

    Sounds like a blown fuse.
     
  3. Terryb62

    Terryb62 New Member

    3
    0
    0
    Aug 24, 2010
    I thinks so ...now its been a couple frustrating days ...were is the fuse I'll check it out.


    Thanks
     
  4. CS-SignSupply

    CS-SignSupply Very Active Member

    It is soldered to the mainboard. Relatively small and a painful mistake.

    I would highly recommend contacting a Roland Dealer in your area to troubleshoot.

    Sending you PM with Roland dealers in your area
     
Loading...

Share This Page

 


Loading...