NZDR-Payne
New Member
Any of you techs out there have the head alignment tools/jigs for the HP 9000 / Seiko CP 64s printers? If you have these send me a PM or reply to thread.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
HP 9000 / Seiko CP 64s Head Alignment Jigs
- Thread starter NZDR-Payne
- Start date
NZDR-Payne
New Member
Bump
Hello.
Where I leave not even HP technicians have it.
I designed and made my own "guides" on 3mm. plexiglass cut by laser, with the intention of not loosing the adjustment of th PH when removing it for cleaning.
I made it in two parts: One for fixing the "Y" position and other for the angle.
Since two printheads needed adjustment anyway, I used this guides as a reference for moving them slightly for adjustment.
This process was a nightmare, but the result was great (perhaps not as accurate as with the right tool, but nothing perceivable on my prints).
I Hope this helps.
![](http://"C:\Users\SiMain\Desktop\PH Guide.jpg")
Where I leave not even HP technicians have it.
I designed and made my own "guides" on 3mm. plexiglass cut by laser, with the intention of not loosing the adjustment of th PH when removing it for cleaning.
I made it in two parts: One for fixing the "Y" position and other for the angle.
Since two printheads needed adjustment anyway, I used this guides as a reference for moving them slightly for adjustment.
This process was a nightmare, but the result was great (perhaps not as accurate as with the right tool, but nothing perceivable on my prints).
I Hope this helps.
Ahmed Samy Nagada
New Member
Hi Quix, could you provide a picture?
I tried when I posted the first message, but it asks me for a "Link". Do you know how can it be done?
... or you can PM me your mail and I'll send you the pictures.
Ahmed Samy Nagada
New Member
Many many thanks.
johnnysigns
New Member
Holy overly complicated!
Alignment Jigs Measurements
sorry to bump this thread after so long. I wondered if Quix can give more detailed information about the alignment jig.
I have a CNC router to manufacture it. Is it possible that you can send me data or the measurements used for your jigs?
Many thanks in advance,
Kay
sorry to bump this thread after so long. I wondered if Quix can give more detailed information about the alignment jig.
I have a CNC router to manufacture it. Is it possible that you can send me data or the measurements used for your jigs?
Many thanks in advance,
Kay