HP L25500 firmware 6.0.1.6 search

Refer this page:

Code:

https://signs101.com/threads/new-firmware-6-0-1-6-for-l25500.112110/

 

After checked some places, almost they link to that HP server and no longer work. I am sorry.

 

I have the 06.00.01.7 version. Just let me know if that works for you.

 

Hi.Can anyone send me firmware version 6.0.1.6. or 7.0.0.4 for my L25500 because lates firmware from HP version GG-CAL_07_00_01.5 don't work.

 

Hi.Can anyone send me firmware version 6.0.1.6. or 7.0.0.4 for my L25500 because lates firmware from HP version GG-CAL_07_00_01.5 don't work.

 

I have 7.0.0.3, not sure how to upload it easily.

 

https://support.hp.com/us-en/drivers/selfservice/hp-designjet-l25500-printer-series/3974848

 

That would be 7.00.01.5, which evidently does not work.
The version I have is properly titled GG-CAL_07_00_00.3_mvl40-x86-opt_B.signed.fmw

 

sent me to my email:
pecemerkovski@gmail.com

 

I never would have thought of that! It's on the way.

 

Update successful.Thanks.Now i will try the 7.00.01.5 to see if now can update to final firmware.

 

Glad to help. I'll probably sit on this firmware until I replace the print computer, so anyone wanting this in the future, just ask.

 

I have update to GG-CAL_07_00_01.5 now without any problem.Now i have the latest firmware on my printer.Next is to sell L25500 here and buy HP L260.

 

My L25500 is running on GG-CAL_5.0.0.8.
It prints great, with no issues.
What would be the advantage in updating?

 

Your not going to be able to sell the L25500. The 260 will have the same issue with no ink or support. Do you mean a 360?

 

True. I see them all the time dirt cheap, and no one buys them.
BUT, I will run mine till it absolutely can not be fixed, and wont run anymore.
I have a fairly new Mutoh eco machine that Dont get used as much as it should because I just love my L25500.
It is a workhorse.

 

I know at one point they issued an update that would keep banners from jamming every single time. It would turn the vacuum way down, so when the machine fed banner out and back in, then would feed 6" and start printing within 1-2 seconds, the banner would stick to the platen and roll over itself, then get hit by the carriage. I could never print on banners until that update without putting the material on the take up reel with the tension bar in place. Afterwards I could pretty reliably. If you don't have this issue,or never print banners, there would not be much benefit that I am aware of.
I miss this thing, shy of the upgraded inks, I actually preferred the take up reel on it to this immovable one. Also loading didn't require you to hold a 150lb roll of material up with one hand while sliding the spindle in with the other, you just dropped it into the tray.