Geneva Olson
Expert Storyteller
Yesterday I was printing color swatches for a particular color match for a customer. It's gray but more toward the green side of gray. I had several color swatches. They started out printing the correct colors and then did an ombre and printed straight blue.
I replaced the printheads back in july or august so they are all still under warranty. I'm thinking that the yellow printheads are bad.
I did a printhead cleaning and then a color calibration. The calibration always stops with a 79:04 code. I think I need a new hard drive. So, my question is. Should I change out the printheads and see if that fixes it, OR get a new hard drive OR get a new printer.
anybody have any ideas? ive got a call in to gsg tech support but i figured I'd throw this out here and see what people say?
pictures attached.
I replaced the printheads back in july or august so they are all still under warranty. I'm thinking that the yellow printheads are bad.
I did a printhead cleaning and then a color calibration. The calibration always stops with a 79:04 code. I think I need a new hard drive. So, my question is. Should I change out the printheads and see if that fixes it, OR get a new hard drive OR get a new printer.
anybody have any ideas? ive got a call in to gsg tech support but i figured I'd throw this out here and see what people say?
pictures attached.