I need help to setup my Anapurna M2500

[taf]

We bought Anapurna m2500 from France, but i cant connect to IP 192.168.1.5
My manual is old, pretty damaged and is in french... I cannot read the instructions
Checked the cable with tester - OK
Tried with different cables same issue
Tried few different networks adapter on the PC - same issue
Tried router between the PC and M2500 with routere IP 192.168.1.1 and 192.168.1.254 - no luck ...
The network adapter on the M2050 is blinking with both leds - green and yellow ( which i guess means there is some traffic ... )
I tried to send the file to 192.168.1.5 with no success
I tried to ping 192.168.1.5 with no success
My Firmware is pretty old - year 2010, Version v3.119cWAC9swhdrg.bnc

AgfaRipM2500_V3.079

The previous owner promised that printer is working, but i cannot connect with him the give me instructions how to set my IPs
Any help would be highly appreciated!
Thanks in advance

TAF

 

[taf]

Trying to send file...

 

[nrb]

Hi, did you make it run?

Hi, did you make it run? Im trying to run Anapurna M with onyx and it says no valid ip found