I see the bitmap, but after 6 tries the printer will not print it.

[gabagoo]

That title is not entirely accurate. here is the issue. I have a bitmap that has some rough edges and I made a cutline to cut off the areas I don't want after printing. That will print fine, but the other part of this job is a decal on white. I figured if I left the cutline in there and then made a white box around the bitmap and then combined the cutline with the white box, only the part of the bitmap that I want will show...and on the screen and even the print manager I can see the bitmap, but after 6 attempts and a computer restart it prints everything but the bitmap. I figure that it see's the white box on top of the bitmap and prints nothing, but I do have it combined and can see it in preview so I am stumped.

 

[gabagoo]

OK...figured it out.... I left the initial cutline as a cut line and forgot to turn contour off....good thing it didn't print as it would have attempted to cut the logo inside the decal....I find it weird as a cutline that it allowed itself to combine with a white box....