Ideal portable table to take on install sites.

[GAC05]

View attachment 156778

'Take your grandma to work day' in Texas?

 

[Notarealsignguy]

'Take your grandma to work day' in Texas?

She ate too many prunes

 

[Johnny Best]

Tex just gets these workers at Home Depot and a 4x8 sheet of plywood to make his work table. Puts the 4x8 in first and the workers sit on top so it does not blow out while driving.

 

[McDonald Signs]

We just use a 3ft x 5ft standard folding leg / lock table with a white vinyl surface top when we need a table on a worksite. I bought it on some restaurant supplies website.
It folds up and is only about 2-1/2in thick and not very heavy at all

 

[Boudica]

We just use a 3ft x 5ft standard folding leg / lock table with a white vinyl surface top when we need a table on a worksite. I bought it on some restaurant supplies website.
It folds up and is only about 2-1/2in thick and not very heavy at all

That sounds like what the OP is using.

 

[Stacey K]

I never needed anything more flat than my old folding table. I do like my cart, fits in the back of the minivan perfectly! Has the basics including a little stool.

 

[gnubler]

This has been on my shopping list for a while now and I like the cart idea too. Time to upgrade.

 

[Stacey K]

This has been on my shopping list for a while now and I like the cart idea too. Time to upgrade.

Amazon is where I got this one.

 

[Gino]

Tex just gets these workers at Home Depot and a 4x8 sheet of plywood to make his work table. Puts the 4x8 in first and the workers sit on top so it does not blow out while driving.

I thought it was a buncha guys facing qibla getting ready to work after their prayer break.

 

[Johnny Best]

I thought it was a buncha guys facing qibla getting ready to work after their prayer break.

Well they could be Muslims, Tex picked them up coming over the boarder and thought it strange when they wanted to know which way was east and repeated "Mecca, Mecca". Tex thought that was spanish for "food".

 

[Gino]

Taco Taco ................................... Wonder if they fell of the truck, twice ??

 

[MelloImagingTechnologies]

Here's what my high volume wrap guys use.
They usually have one for each installer for every job.

 

[Stacey K]

Here's what my high volume wrap guys use.
They usually have one for each installer for every job.
View attachment 156828

This is nice! Looks like it's the perfect height for a trailer or van!

 

[Johnny Best]

Thanks for the recmmendationss. Got my installer a cart yesterday.

 

[Notarealsignguy]

Thanks for the recmmendationss. Got my installer a cart yesterday.

Nice hat johnny

 

[James Burke]

If you're not pulling a trailer, this would be my pick. Replacing the top to something different is an easy mod.


JB

 

[Gino]

is that where a backseat drivers sits ??

 

[James Burke]

is that where a backseat drivers sits ??

Nope...the tail gunners. Some of those neighborhoods are pretty rough.


JB

 

[Notarealsignguy]

Here's what my high volume wrap guys use.
They usually have one for each installer for every job.
View attachment 156828

We had this exact same thing and had an employee trip and fall working off of it. His ribs hit the post first before he fell all the way to the ground. It hurt him pretty bad. That thing always sketched me out to begin with and after that it went in the trash. That top walk is dangerous, the railing needs to be higher .

 

[johnnysigns]

Paulk style workbenches? Been itching to make some for our laminator infeed/outfeed so we can stow them in our pallet racks when not in use.