install 4ft X 18ft panel on wall

[bigben]

What would be the best technique to install a 4ft high X 18ft long vinyl on a wall? It's a vinyl/dry erase laminate combo. I'm thinking of using my big squeegee, but I'm not sure how to align my panel to be strait.

How would you do this?

Thanks.

Ben

 

[eahicks]

This should not be hard....tape the whole thing to the wall, getting it level. Hinge the middle vertically, lay one half then the other...providing you have 2 people.

 

[JgS]

get a piece of tape and make a straight line as a guide at the top.

 

[Tim Aucoin]

This should not be hard....tape the whole thing to the wall, getting it level. Hinge the middle vertically, lay one half then the other...providing you have 2 people.

Agree! Hinge and use big squeegee to lay each half!

 

[Pixels Are Bad Mmmkay?]

This should not be hard....tape the whole thing to the wall, getting it level. Hinge the middle vertically, lay one half then the other...providing you have 2 people.

Agree. ^^^

 

[bigben]

That was my first idea, but I was curious to know if there was an other option. I'll go with the first idea then.

Thanks for your help.

Ben