Install vinyl in high humidity room

[gnubler]

Customer wants a door window blacked out in a hot tub room, just black vinyl installed on the inside of the window. Any recommended brands to use? Any tips on doing the install? I was planning on doing it with the door open so I can get the glass totally dry.

 

[Johnny Best]

3m7125

 

[Notarealsignguy]

Texassignmaker will have an answer for this. The men's locker room is his favorite place

 

[gnubler]

I heard everything's bigger in Texas, probably even hot tubs.

 

[Texas_Signmaker]

Texassignmaker will have an answer for this. The men's locker room is his favorite place

Beats hanging around the turtle exhibit at the zoo.

 

[Notarealsignguy]

I heard everything's bigger in Texas

Not so says Texthesignmaker

 

[gnubler]

3m7125

I looked this one up, any particular reason you suggested it? I have some Gerber 220 (cast, black gloss and matte) in stock, will that be fine for this install?

 

[Gino]

Tape it off and paint it.

 

[Johnny Best]

Gerber buys their cast vinyl from 3M and calls it 220, so its the same thing.

 

[Johnny Best]

Tex can clear out the room for you to install vinyl.
You will also see that not everything in Texas is big.

 

[gnubler]

Tape it off and paint it.

The customer already tried that and the paint never cured, just peeled right off the glass.

 

[Gino]

Then, he/she did it wrong or used the wrong kinda paint.

The correct way to do it is to remove the door and take it somewhere to use whatever method of choice and do it under correct conditions.

 

[mkmie]

Any reason you can't apply it to the outside of the window? Either way is it a small window? Throw on whatever you have around. If it doesn't work come back with another material but I am sure any black vinyl will do the trick.
Sounds like a 10-minute job to me.