installing vinyl on the back of clear acrylic...

[nashvillesigns]

i have not done this in so long when i did, it looked horrible.
either i need new squeegees, of i have to start lifting weights again.

there are streak marks on the black from the front side.

1. should i do this wet?
2. i used clear tape. is that right?
3. what should i clean the acrylic with?

thanks!


Mr. M

 

[nashvillesigns]

well, i got that fixed good.
1. use regular transfer tape.
2. use LOTS of rapid tac.
3. Squeegee slowly.

after flipping the sign over, there are no bubbles or streaks. i tried this the first stuff dry. that was a disaster.

Mr M.