Is it possible to......

[bayshorecreations]

I am running Flexi Print & Cut 8.6 on my computer in my shop. My question is can I load it on to my Laptop also and just switch the dongle from my desktop to my laptop or would i need to buy another copy with a separate dongle for the laptop? The only thing that I want to be able to do is be able to either computer to rip and cut from.
Thanks

 

[cgsigns_jamie]

Works for me, I have a hardware key. If you have the software key you have to release the license on one computer before you can use it on the other. I believe that option is in the "Help" menu.

 

[bayshorecreations]

Thanks! I have the hardware dongle so I guess I can do it... Awesome!

 

[907customs]

yeah, you can use it on both computers, just one at a time however.

 

[cgsigns_jamie]

You can also use the key over the network.

If you have two computers on the same network you can run Flexi on one computer and production manager on another. I have all my cutters and printer connected to one computer with PM open and run Flexi on another computer with the key attached to the rip computer.

I used to keep all the keys connected to the server that way people wouldn't know a key was required to run the software.

 

[houseofgrafix]

You can also use the key over the network.

If you have two computers on the same network you can run Flexi on one computer and production manager on another. I have all my cutters and printer connected to one computer with PM open and run Flexi on another computer with the key attached to the rip computer.

I used to keep all the keys connected to the server that way people wouldn't know a key was required to run the software.

Same here

 

[Mike Paul]

Yep, just swap it.