Is this the right ink pump?

[CENTERVILLE SIGNS]

Roland Versacamm SP-300

 

[Solventinkjet]

There are two types of pumps that can be used in the Sp-300 and the one you picture is the old style. There is also a newer style one that only has 1 intake and output see below. Also, be careful with the white tube pumps. Some are not solvent resistant. If the tubes are clear they are solvent resistant for sure.

 

[CENTERVILLE SIGNS]

There are two types of pumps that can be used in the Sp-300 and the one you picture is the old style. There is also a newer style one that only has 1 intake and output see below. Also, be careful with the white tube pumps. Some are not solvent resistant. If the tubes are clear they are solvent resistant for sure.

 

[CENTERVILLE SIGNS]

There are two types of pumps that can be used in the Sp-300 and the one you picture is the old style. There is also a newer style one that only has 1 intake and output see below. Also, be careful with the white tube pumps. Some are not solvent resistant. If the tubes are clear they are solvent resistant for sure.

 

[CENTERVILLE SIGNS]

THANK YOU

 

[FrankW]

If your SP300 has the old type installed, you need a conversion kit to mount the new pump. And you need to change a setting of the ink pump motor.