Suggestions JFX 200-2513 Muffler

[MSSDon]

This is cheap but it works very well! Thanks to Larry Shaw for making it for me while he doing our training.

 

[feckmo]

Great idea! No issues with vacuum pressure or extra work on the motor?

This thing does need a muffler right out of the box. Man, is it loud...

 

[MSSDon]

Great idea! No issues with vacuum pressure or extra work on the motor?

This thing does need a muffler right out of the box. Man, is it loud...

Not so far and it makes so much difference in the noise! Vacuum pressure is as strong as ever.

 

[Rip]

This is cheap but it works very well! Thanks to Larry Shaw for making it for me while he doing our training.

We just set up 2 JFX200-2513's and man they are loud. I looked at your pic and was wondering what he had put inside the tube? Because I really need to make a couple of these. Info would be greatly appreciated.

 

[MSSDon]

We just set up 2 JFX200-2513's and man they are loud. I looked at your pic and was wondering what he had put inside the tube? Because I really need to make a couple of these. Info would be greatly appreciated.

We actually used some of the styrofoam packing that came with our machine. That is about it! Every now and then I pull it off to remind myself how much it dampens the noise. lol Good luck!

 

[MAC Specialties]

That's a great idea. We also have two of those flatbed printers. We're definitely going to try and make that. Thanks.

 

[Lytjan13]

After seeing this I made one this morning and it makes a huge difference in being able to hear anything going on in my shop.

 

[guillermo]

This is cheap but it works very well! Thanks to Larry Shaw for making it for me while he doing our training.

we got the machine 7 years ago and the first thing I said to the tech was that is too loud, he asked me if I have a tube from the paper roll the small ones, I believe is 2", he connected it to the "out" of the air and, that was it, it cut down the noise for about 60%. I have mine just like the one on this picture.

 

[Smoke_Jaguar]

Good tip, didn't see this until now. Will try tomorrow on the JFX200 and the JFX200EX