JFX 200-2513 system halt 19a: EMG Push Error

[RobinSG]

Hello,

When I turn my machine on, it gives me this message: "System halt 19a: EMG Push." Can anyone help me by letting me know how to fix it?

Thanks

 

[Smoke_Jaguar]

Usually means an emergency stop switch is pushed down, could also be a break in the e-stop circuit.

 

[netsol]

very similar, i think to roland "cover open"?

 

[Smoke_Jaguar]

In the cases of some printers like the UJF series, the switch is tied into the same loop

 

[FutureSigns]

Hello,

When I turn my machine on, it gives me this message: "System halt 19a: EMG Push." Can anyone help me by letting me know how to fix it?

Thanks

One of the red emergency buttons is pushed down.

 

[Solventinkjet]

I've also seen a couple times on this model where the switch gets stuck so you might need to take some of the covers off around it and check if anything is preventing it from popping fully back up.

 

[RobinSG]

I've also seen a couple times on this model where the switch gets stuck so you might need to take some of the covers off around it and check if anything is preventing it from popping fully back up.

Thanks. Yes, the button was stuck down. I got it back up and it shut off the error. Now I am trying to nozzle wash, and it will not let me press enter when I get there. Do you know why it will not let me nozzle wash?

Thanks