Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

just one more rookie question

Discussion in 'Newbie Forum' started by DAVE KEPHART, Nov 16, 2007.

  1. DAVE KEPHART

    DAVE KEPHART New Member

    21
    0
    0
    Oct 3, 2007
    gx-24 .how do i know for certain the blade should be changed out. I did some small lettering and the blade was tearing the letters out while cutting.the blade is pretty new only cut a dozen this so far.
     
    Tags:
  2. PMG

    PMG Very Active Member

    2,453
    0
    0
    Feb 1, 2005
    What degree blade you using....... if your using 45 degree blade i would try backing the pressure off some..... i would use a 60 degree blade for fine lettering myself. I have about 20 + full rolls on my blade cutting vinyl and lam.....pressure and degree of blade are key.
     
  3. DAVE KEPHART

    DAVE KEPHART New Member

    21
    0
    0
    Oct 3, 2007
    thank you ,that answers my question exactly
     
  4. PMG

    PMG Very Active Member

    2,453
    0
    0
    Feb 1, 2005
    If you can slow the speed down that may help as well.!
     
  5. Bogie

    Bogie Very Active Member

    1,972
    0
    0
    May 17, 2007
    Yeah, no matter how slowly I have my machine running, it still produces stuff faster than I can print or weed...
     
Loading...

Share This Page

 


Loading...