jv3 head replacement

[wavegypsy]

According to head replacement instructions, new print heads are shipped with a waterborne solution that needs to be flushed to prevent clogging. Is the solution to flush the head cleaning solvent or a special solvent specific to this procedure?

Thanks.

 

[MikePro]

just regular cleaning solution for your printer nothing special.

p.s. Walgreens sells syringes 10/$30, recommended that you get some tubing to lead from the syringe to the printhead for flexibility/adaption.

 

[wavegypsy]

Thanks,

You can also get syringes from an animal feed store.

 

[wavegypsy]

The syringe I bought at the feed store was only about $5.00

 

[wavegypsy]

The syringe I bought at the feed store was only about $5.00

 

[Robert M]

Mimaki JV3 print heads

I have them on my site
www.solventinkjet.com
$750.00

 

[MikePro]

just regular cleaning solution for your printer nothing special.

p.s. Walgreens sells syringes 10/$30, recommended that you get some tubing to lead from the syringe to the printhead for flexibility/adaption.

my bad... meant to say 10/$3... so 30cents each, and the tubing i get from a local hardware store for 19cents a foot.