I use the MIMAKI JV33-160 for sublimation printing. When I changed the printhead I accidentally burnt the motherboard (cannot download the CSV from the old motherboard). So now I changed the motherboard (bought a used machine for little money) and installed the 2.20 firmware on the machine.
I have the circuit board as in the attachment for resetting the inks, because I have Bulk system. When I press the button it resets the inks from 0 to 9.
I have selected Sb51 6 colors (as I have CMYK and fluo yellow and fluo magenta). Now 6 colors it resets and shows ok, and 2 of them cC are not recognised.
Is anyone familiar with this resetter or has a clue how to solve this problem?
I have the circuit board as in the attachment for resetting the inks, because I have Bulk system. When I press the button it resets the inks from 0 to 9.
I have selected Sb51 6 colors (as I have CMYK and fluo yellow and fluo magenta). Now 6 colors it resets and shows ok, and 2 of them cC are not recognised.
Is anyone familiar with this resetter or has a clue how to solve this problem?
Last edited:
