jacksonsigns
New Member
I replaced the head in my JV33 and now it won't turn on. It was not a genuine Mimaki head but I have an older firmware (1.7 i think) so I didn't think that would be a problem. When I turn the power on the screen reads "boot" for a fraction of a second and then goes blank. I unplugged and drained all power before replacing the head so I don't think anything is fried. I believe it is protecting itself from something and won't boot up.
Steps I have tried-
check all connections= no luck
install new data cables = no luck
re install old head = no luck
check all connections again = still no luck!
Any help would be greatly appreciated.
Mike
Steps I have tried-
check all connections= no luck
install new data cables = no luck
re install old head = no luck
check all connections again = still no luck!
Any help would be greatly appreciated.
Mike