Laminator roller replacement/repair

[Jumpshoutmedia]

Hey, anyone know where I can get new rollers for a Seal 45 heat assisted laminator.. or where I can get them re-lined/refurbished?

I bought this laminator used and the previous owner had gotten a bit randy with the razor knife in a couple spots so the main rollers both have a couple spots where a knife had slit them, and as you may know, when you slit a laminator roller the wound tends to "split open" and leave big voids in the face of the roller!

I remember many years ago seeing an advertisement in an old sign magazine for a company that would re-fit your old laminator rollers with new foam or rubber, but I tried googling and couldn't find anything.

Anyone have any leads on new parts for an older Seal 45 laminator or a refurbishing service?

Thanks!

 

[Roland Certified Tech]

Laminator Roller Repair - Laminator Rollers, hot laminating rollers, Atlantek, 85 DSS Card Printer, Xyron, Preview 500, Professional 2500, XM 4400, D K Group, EXP 42, EXP 44, EXP 62, EXP 63, EXP 65, Minikote, Minikote EZ, Superkote, DryLam, FujiPla,

laminatorrollerrepair.com

 

[dypinc]

https://a-kornroller.com/

 

[MarkSnelling]

You can purchase a new roller from Seal. Getting a roller recoated usually takes several weeks. Seal should have the rollers in stock in Wisconsin.

 

[Jumpshoutmedia]

Thank you guys for the responses! Damn I love this forum. It's the only forum on the web where you can almost always count on getting good, relevant, helpful replies!