Leveling the bed of our Zund G3 Cutter

[FireSprint.com]

We had a tech in recently to help us re-level the bed of our Zund G3 Cutter. We decided to shoot and share this video in case it helps anyone!

If you need zund CNC contour cutting of any popular sign material like PVC, Corrugated Plastic, Foamboard, ACM or Styrene visit FireSprint.com!

 

[FireSprint.com]

Amazing what leveling the bed professionally did to help. Made the biggest difference when routing aluminum and omegabond/dibond.

 

[ProPDF]

Thanks for posting!!

 

[flyplainsdrifta]

yeah thank you for posting!! looking at having ours done soon.

 

[Raj2020]

We had a tech in recently to help us re-level the bed of our Zund G3 Cutter. We decided to shoot and share this video in case it helps anyone!

If you need zund CNC contour cutting of any popular sign material like PVC, Corrugated Plastic, Foamboard, ACM or Styrene visit FireSprint.com!

Hi there. We have an older Zund M1600 that we desperately need to level. Was thinking this video would help, but, the video is private and cannot be viewed. Any chance you could make the video or share it privately? Many thanks

 

[Greg Kelm]

Hi there. We have an older Zund M1600 that we desperately need to level. Was thinking this video would help, but, the video is private and cannot be viewed. Any chance you could make the video or share it privately? Many thanks

You need to have a technician come and do the work. They have a tool to measure each vacuum plate across the table.

 

[jasonx]

They mount a dial indicator to the gantry. Then adjust each vacuum plate so they are all level.

https://www.globaltestsupply.com/pr...196iN0PZstJtYSpGq-2Wn4DevyCMxdmkaAjVGEALw_wcB

Do it while your belt is off.

 

[Raum Divarco]

They mount a dial indicator to the gantry. Then adjust each vacuum plate so they are all level.

https://www.globaltestsupply.com/pr...196iN0PZstJtYSpGq-2Wn4DevyCMxdmkaAjVGEALw_wcB

Do it while your belt is off.

yea its not overly technical just tedious

 

[player]

We had a tech in recently to help us re-level the bed of our Zund G3 Cutter. We decided to shoot and share this video in case it helps anyone!

If you need zund CNC contour cutting of any popular sign material like PVC, Corrugated Plastic, Foamboard, ACM or Styrene visit FireSprint.com!

The video won't play, it says "Video unavailable.This video is private".

 

[FireSprint.com]

Sorry, Zund asked us to pull the video down.

 

[tmbrhtch]

Can someone send me the Video of the machine being levelled? We are needing to the same thing and like to see the process first. Please email me at marty@pmgdigital.com

 

[JuRoc]

i've seen and helped the tech level the bed, but i have not seen what are the bolt/screws that he tightens/loosens to fix the plates.
anyway ya'll can share the video with me, also if i buy the magnetic dial indicator, would that be good enough or do i need to buy the bracket that goes into a slot?

 

[FireSprint.com]

i've seen and helped the tech level the bed, but i have not seen what are the bolt/screws that he tightens/loosens to fix the plates.
anyway ya'll can share the video with me, also if i buy the magnetic dial indicator, would that be good enough or do i need to buy the bracket that goes into a slot?

Send me your email address.