looking for a supplier that carries 2ft banner rolls or something around 2ft.

[0igo]

ive been printing a lot of 2ft banners recently and im tired of throwing away the 1ft extra material. any recommendations is appreciated.

 

[FatCat]

30" banner is pretty common, but if you have a 54" printer, just double up two, 2' banners and voila!

 

[Solventinkjet]

Price the waste into the product and keep on keeping on.

Unless you are more environmentally conscious. In that case, you aren't going to find a lot of 24" banner that wasn't slit down from another bigger size where waste is being thrown out anyway. The best size, that isn't slit with waste, you are going to find is 30" in my experience. You could have a 54" or 60" slit but there will be waste still if you want 24".

Or just get 30" banner and after hemming it will be 28" and no one will notice it isn't 24" unless it is for a very size specific application, which in my experience is not usually the case for banners. You could even do a sale for 28" banners for the price of 24"! Maybe I got carried away with that last part. Happy Friday!

 

[0igo]

Price the waste into the product and keep on keeping on.

Unless you are more environmentally conscious. In that case, you aren't going to find a lot of 24" banner that wasn't slit down from another bigger size where waste is being thrown out anyway. The best size, that isn't slit with waste, you are going to find is 30" in my experience. You could have a 54" or 60" slit but there will be waste still if you want 24".

Or just get 30" banner and after hemming it will be 28" and no one will notice it isn't 24" unless it is for a very size specific application, which in my experience is not usually the case for banners. You could even do a sale for 28" banners for the price of 24"! Maybe I got carried away with that last part. Happy Friday!

lol thanks man, yeah i always price the waste into it, but i just seen fellers carries 30" banners. idk why i never noticed that.

 

[boxerbay]

buy a 63" roll and have someone with a bandsaw cut out three 20" rolls for you.

oops you said 24" so then 54/2 = 24" rolls.

 

[solock]

Grimco will slit rolls, just slit a 54" roll and viola, two rolls of 27"!

 

[SignPros]

Fellers carries a 25" roll. Though it seems like I always have to convince the rep on the phone that they actually do have it.

 

[Pixels Are Bad Mmmkay?]

Fellers carries a 25" roll. Though it seems like I always have to convince the rep on the phone that they actually do have it.

Do you print on it? The only 25" stock that I see is the 14 oz. high gloss crap for cut vinyl and screen print applications.

 

[Pixels Are Bad Mmmkay?]

Fellers carries a 25" roll. Though it seems like I always have to convince the rep on the phone that they actually do have it.

That is great to know. Thanks for the head's up.

 

[jkdbjj]

All towns have a small company that is called a converter. They can take your roll and cut it to any size.

I'd caution using a bandsaw, chopsaw etc unless you are comfortable with those machines to experiment.

It'll cost you 10-15 dollars to take it to a conversion place. Or better yet if your vendor can do it that's great.