Looking for an old thread - Versaworks Alignment Marks

[SublimeGraphics]

Someone please help me out here.......I know there was an old thread somebody wrote explaining how to print a job with Alignment marks repeatedly, so it can print un-attended. Example - I have a job that is set up to print 4 pieces 24"x24" prints with Print/Cut Alignment marks.....but i need 40 pieces so i would like to set the printer to print the job 10 times with space in between, so i don't have to sit here and hit print 10 times in a row.

of course i can't seem to find this thread now, any help is much appreciated.
thanks

 

[Malkin]

It has to do with setting a custom sheet size that is slightly bigger than each run.

Here is a post I did a ways back in a thread that was sort of similar, except it included doing the cuts right away and then a sheet cut in between each one.
http://www.signs101.com/forums/showpost.php?p=837670&postcount=49

 

[Wiggum PI]

I think this is what you're after..

 

[scuba_steve2699]

try this video

http://youtu.be/TvYTTogtmQM

 

[splizaat]

I use this ALL THE TIME on our 30"....multiple sheets print with alignment then go back and cut...although we have to hit "cut only" on every sheet manually once they're printed...it doesn't continue to find the next sheet, search for alignment marks and then cut all the sheets with one button.