Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Looking for Flatbed

Discussion in 'Flatbed Printers' started by Dan811, Feb 2, 2010.

  1. Dan811

    Dan811 New Member

    5
    0
    0
    Feb 2, 2010
    Hey guys!

    I am looking for a used flatbed plotter. What I need is something that can import a file with cut paths and reg marks that I create in illustrator. This program must be able to read my registration marks and not create its own around my printed image. This is because my printer needs to go through another program after illustrator prior to print. What i am using now is a zund with optiscout, but its lease is up and I must find something to take its place. Any referrals or advice is much appreciated.
    Thanks,
    Dan
     
  2. BigfishDM

    BigfishDM Merchant Member

    5,023
    421
    83
    Jun 22, 2009
    All Over
  3. Dan811

    Dan811 New Member

    5
    0
    0
    Feb 2, 2010
    Thanks! I will check that out now.
     
  4. beermonster

    beermonster Member

    72
    0
    0
    Jul 24, 2009
    artios cad will do that nicely - look for esko artwork - totally compatable with zund - i got the same set up here
     
Loading...

Share This Page

 


Loading...