After handling easel posters my customers complain about edges & corners getting damaged. I have tried polymer materials from Lowe's but not satisfied with the result. I recall in years past a U channel light weight aluminum for sealing the edges but have not located. Any info or suggestions?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Looking for U channel material for easel posters
- Thread starter Farm Boy
- Start date
J Hill Designs
New Member
thickness?
maybe just the plastic edge cap - at framing stores they have it for 3/16" matte board
maybe just the plastic edge cap - at framing stores they have it for 3/16" matte board
At my old job we had one of these > > > http://fastframer.com/
They have different thickness of edging in several colors.
If you do a lot of them, they have a machine that notches the angles but leaves
the channel attached. We had one of the stand up notchers...they're a lil' pricey.
After framing, we used a syringe with some acetone and ran it around
back of the frame, which bonded the frame to the foam board.
They have different thickness of edging in several colors.
If you do a lot of them, they have a machine that notches the angles but leaves
the channel attached. We had one of the stand up notchers...they're a lil' pricey.
After framing, we used a syringe with some acetone and ran it around
back of the frame, which bonded the frame to the foam board.
J Hill Designs
New Member
yep that stuff ^^^