Need Help Magnetics don't work on Aluminum...Duh. But WHAT does?!

[printhog]

3M 3552C series is what you need.. to make it easier for their staff to handle it - pair it with a thick overlaminate.. your client will have to buy overage as they'll likely lose some to glue getting dirty. I tell my clients to KEEP THE RELEASE LINER so they can store the decal after removing it. if it gets wrinkeld, they can lay it face down on a table and heat it with a heat gun (no torch) to get it to flow flat again. DO NOT APPLY APPLICATION TAPE TO THIS STUFF.

I've balled this stuff up in front of a client, then pulled it back out to flat, and repeated that several times in sales demos. It removes without heat. I've used it to wrap rental cars for special events.

http://multimedia.3m.com/mws/media/...able-graphic-film-comply-adhesive-ij3552c.pdf

Fellers carries it - 3M IJ3552C with ControlTac & Comply 2 Mil 2yr | FELLERS

 

[printhog]

3m 3552c will do it.. laminate with a thick 4mil clear so the decals are easy to handle. tell client to order extra as they will lose some to dirt, bad handling, etc. do not put application tape on these.. & tell client to KEEP THE RELEASE LINER TO STORE THE DECAL ON.

fellers sells it - 3M IJ3552C with ControlTac & Comply 2 Mil 2yr | FELLERS

 

[JR's]

will the IDot work in a Summa DC4 sx 30" ???

 

[ChaseO]

Yeah no problem, shoot me over all your company info.

I hate to ask for samples, but could I get one coming too along with pricing? Thanks

 

[BigfishDM]

I hate to ask for samples, but could I get one coming too along with pricing? Thanks

Lol never hesitate asking me for ANYTHING! I get a lot of requests and sometimes a few will fall through the cracks, but yeah just PM me the company info again with your email and I will have one of the reps do it all today no problem. All we ask is that you give us a UPS or FedEx# to ship the sample on.

 

[BigfishDM]

will the IDot work in a Summa DC4 sx 30" ???

I have not tested in thermal machines yet.

 

[cajun312]

Lol never hesitate asking me for ANYTHING! I get a lot of requests and sometimes a few will fall through the cracks, but yeah just PM me the company info again with your email and I will have one of the reps do it all today no problem. All we ask is that you give us a UPS or FedEx# to ship the sample on.

Is this available in 30" rolls?

 

[BigfishDM]

We have done several on Phototex for people. They have to save the liners too if they want to remove and save.

This material is a great alternative to the adhesive fabrics like Phototex. Phototex is really cool stuff don't get me wrong, but the iDot material is a lot more cost effective and it works in the same manner.

 

[BigfishDM]

Is this available in 30" rolls?

No but I can cut down 50" rolls, you end up paying the same price but it can be done if you needed it. You would get a 30" roll and a 20" roll (Or really close to those sizes)