Mark on Prints

[Netter26]

I have a VJ1324 and I’ve been getting what looks like a static mark on all my prints. It happens the left side of the printer 3/4 the way down, then the mark angles upwards until it reaches the end of the vinyl on the left side. Always happens in the same spot and pattern. I have the printer grounded and the I’ve cleaned the rollers. Could it be an electrical issue?

Thank you

 

[Solventinkjet]

Could be static or electrical for sure but I would start by inspecting and cleaning the encoder strip. How's the nozzle check look?

 

[Netter26]

Okay thanks, I’ll check that out. Could be from the table from loading up the roll. my nozzle check is perfect and I’ve cleaned the encoder strip within the last 3 days. The encoder strip has some small scratches on it from the back and forth motion, could that cause an issue?

 

[Netter26]

Nice! Great idea. That makes sense to why that mark would show up. Thank you