Suggestions Masking Film for Powder Coating

[FrankW]

I´m looking for a masking film for powder coating. It should have a liner, so it could be used in a cutting plotter. The media and glue should resist temperatures of about 200° C (392° F).

Most of what I have found consists of Polyester or PET, but this is adhesive tape only, without a liner.

I have seen this products earlier, but doesn´t have a name.

I hope there is any suggestion what perhaps could be bought in europe too.

 

[unclebun]

https://www.breninc.com/product-category/materials/masking/

 

[unclebun]

On the other hand this guy claims to use Oracal 651: http://forum.uscutter.com/index.php...ing-over-vinyl/&do=findComment&comment=316939

 

[James Burke]

IPG makes Anchor brand (plotter cut) monument stencil. They also make a wide variety of powder coating tapes and some appear to have liners (much like their monument stencil).

JB


https://itape.com/en/ms/general manufacturing/powder coat masking

 

[FrankW]

Thank you very much for your input. I will check every suggestion.