Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mimaki DS160 interruption of power supply during cleaning

Discussion in 'Mimaki' started by cmyk.ba, Aug 5, 2012.

  1. cmyk.ba

    cmyk.ba New Member

    3
    0
    1
    Aug 5, 2012
    Hi Folks,
    I have a problem on Mimaki DS 160, aqueous base.
    The problem was the HDC board,
    I replaced some transistors and Epson chip on board, the error disappeared,
    Printer initialization is operating normally, but when you have to spit out the ink nozzle, the printer simply shuts down.
    This is a video where during the cleaning needs to spit out the ink nozzle

    http://www.youtube.com/watch?v=dkRT5PABPPw&feature=youtu.be

    This is not the first time to solve the problem on HDC Board, changing the Epson chips and transistors,
    It has always been successful,
    I wonder if someone had a similar problem or know why the printer power is interrupted.

    Please note that I replaced the cables to the new heads

    :thankyou:
     
    Tags:
  2. alangraph

    alangraph New Member

    7
    0
    1
    Nov 3, 2009
    Bogota, Colombia
    Can you give explanation

    Hi, can you poin what chips or transitor did you change for the machine to work again? Have you find a reason for this problem??

    thanks,

    Andres Cotrino
     
Loading...

Share This Page

 


Loading...