"Museum quality" printed signs

[Jean Shimp]

Looking for recommendations for outsourcing "museum grade" high quality digitally printed signs - acrylic on standoff hardware for interior wall. Need about 10 signs, various sizes - 14 x14" to 30" x 60", roughly. Any suggestions? Thanks.

 

[jfiscus]

We do a lot for museums around here; nothing fancy for the most part. Just use quality materials.

 

[visual800]

oops

 

[visual800]

https://eliteletters.com they can cut the acrylic, I would use 1/4" thick, place MATTE prints on top and use standoffs to install

I can do these for you if you need help

 

[jfiscus]

I would recommend routed 1/8" polycarbonate, reverse 2nd surface prints on clear, with white laminate (backer). Regular standoffs will be fine, MBS sells a variety.