• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Mutoh 1324X leaving magenta streaks

P

patrickj75

New Member
Just recently my 1324X has started leaving Magenta streaks on the edges of the material. I've tried cleaning the ramps but that didn't seem to help much if at all.
 

Attachments

  • thumbnail_IMG_7093.jpg
    thumbnail_IMG_7093.jpg
    158.1 KB · Views: 128
Solventinkjet

Solventinkjet

DIY Printer Fixing Guide
Looks like magenta is dropping out of the head. Usually that's going to be a bad damper. If you haven't changed then in the last 12 to 18 months, I'd start there. Also just make sure the bottom of the head is clean, the wiper is make good contact with the head surface, and the cap top is draining properly.
 
You must log in or register to reply here.
Top