• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Mutoh 1638 UH

B

brammekeuh

New Member
Hi guys,

I have an issue with the nozzles in the morning.

There is a little contamination with cyan and yellow, after printing a small area yellow and cyan everything is fine.

But if I don't print for several hours, same issue...

Time for new cappings of what are your thoughts?

Thanks!
 
S

Sindex Printing

New Member
Take a look at the capping station and make sure they are sealing completely around the head. I would start with the capping station first making sure they are clean and the bottom of the heads and carriage is clean. If everything looks to be clean then look at replacing them
 
You must log in or register to reply here.
Top