Mutoh / Epson Printheads

[phildux]

Hi hope somebody might be able to help. looking to replace the printheads in a Mutoh Falcon RJ-800 found that the Epson printhead FO55110 is for the colour head, but can not find out the Epson Number for the Black Head anybody any ideas

Kind Regards
Phil

 

[phildux]

i think this is also know as a Rockhopper 38 but not totaly 100% sure. it is running dye inks if that makes a differance.

another little thing is that on the display it shows an error message MH01 ERROR, has anybody else had this and what do i need to do to sort the problem out
Kind Regards
Phil

 

[ruckusman]

Fairly certain that uses the same heads an the Epson 3000, F055110 is an updated/later version for the colour head also used in the 7000 and 9000

These are DX2 heads

Check this page for reference on the colour heads

http://www.theconsumablesdepot.com/cat/Epson/compat/Epson_Stylus Pro 7000.asp

in which case the black head is F056000
http://www.encompassparts.com/products/?F056000

part number variations are

f056000
F056010
f056010


peace out

 

[ionsigns]

another little thing is that on the display it shows an error message MH01 ERROR, has anybody else had this and what do i need to do to sort the problem out

USB, NIC or Jurassic Park PARALLEL for data com?
I am IEEE 1284. You know. Parallel which was OEM on 88 MHz PC XT. Hahahaha.

Here's what I did to solve the error: Cursed a bit, drink a little. Reset.
My MH01 Error [cannot be confirmed] is a assumed as a connection error that has to do with your PC ram and communication buffers. I check the cables, make sure my PC has as little possible running in the background and attempt a 1/4 size test print.

If this does not solve communications error, call a tech support for your software or Mutoh. (my two cents)

Maybe someone smarter than me will post later.

 

[randya]

RS232

This is a communications error, it thinks it is receiving an unknown command.

Ionsigns is on target here.

 

[ruckusman]

Just checked recent emails from parts suppliers and I should add that asking for either F056000 and F056010 came back negative so try F056030 and f056030, they are the same part but it seems the earlier revisions have been deprecated